Home › Projects › Gutter cleaning Norfolk › — Gutter Cleaning and Repair

Fascia Wrap Installation & Gutter Reinstallation Chesapeake, VA

We took the gutters down, repaired the fascia behind them, wrapped it in aluminum, then cleaned the gutters and hung them back up. One visit, no full replacement.

Chesapeake, VA

Location

Same day

Full completion

Project

Gutter Detach & Reset + Fascia Wrap

5 ★

Google reviewed

This fascia wrap installation in Chesapeake is a good example of a job that sits between a simple cleaning and a full replacement. The gutters on this brick home were still in usable shape, but the fascia board behind them had minor damage. The smart move was to take the gutters down, fix and protect the wood, and put the same gutters back — which is exactly what we did.

🔧 Gutters removed & reinstalled

🪵 Minor fascia damage repaired

🛡️ Aluminum fascia wrap

🧹 Gutters cleaned

Detach

Gutters taken down from the roofline.

Repair & wrap

Minor fascia damage fixed, then wrapped in aluminum.

Clean

Gutters and downspouts cleaned while they’re off the house.

Reinstall

Gutters hung back up and reconnected.

Before: The Existing Gutters

The home is a brick ranch with a bay window and several roofline corners — plenty of places where the gutter meets the fascia. The original gutters and downspouts were all still in place when we arrived.

Step 1: Taking the Gutters Down (Gutter Detach and Reset)

In the trade, this is called a gutter detach and reset: the gutters come off the house, the work behind them gets done, and the same gutters go back up. You can’t properly repair or wrap a fascia board while a gutter is hanging in front of it, so removal comes first.

Step 2: Repairing the Fascia and Forming the Wrap On-Site

With the gutters off, we fixed the minor damage to the fascia boards. Then, instead of ordering pre-made pieces, we formed the wrap on-site from aluminum trim coil, cutting and bending it to fit each section of this roofline — including the angles around the bay window.

Step 3: The Fascia Wrap, Installed

Here’s the roofline with the gutters still off and the wrap in place. The mitered corners are clean, and the wrap follows every angle of the bay window. It’s the fascia board’s protective layer, keeping moisture off the wood once the gutters go back on.

Step 4: Cleaned Gutters Back in Place

With the gutters off the house, we cleaned them out thoroughly. It was much easier to do on the ground than from a ladder. Then we rehung each run, one by one, on the newly wrapped fascia and reconnected the downspouts.

Why Wrap the Fascia While the Gutters Are Off

Fascia can only be fully repaired and wrapped when the gutter isn’t in the way. Coming back to do it later means taking the gutters down a second time.

Protects the wood

Aluminum wrap keeps rain and humidity off the fascia board — the same wood that rots out silently behind neglected gutters on older Hampton Roads homes.

No more scraping and repainting

Pre-finished aluminum doesn’t peel the way painted wood does, so the fascia stops being a recurring paint chore.

Saves a full replacement

When the gutters are still sound, cleaning and reinstalling them costs far less than tearing them out and starting over.

Wrap isn’t a fix for rot. Minor damage can be repaired and wrapped, as on this home. If the fascia has rotted all the way through, the boards have to be replaced first — see our Chesapeake fascia replacement project for what that looks like.

Is a Detach and Reset Right for Your Home?

It's worth asking about if:

Not sure which category your home fits? A free inspection will give you an honest answer: whether it needs a wrap, a repair, a replacement, or no work at all.